Loba Amberizer

WS Amberizer for Loba Finishes is an additive to achieve the traditional look of an aged oil modified polyurethane finish with Water-based coatings.

• Adds the look of oil based finish
• Great to touch up and repair old floors
• Convenient package and great color consistency
• Suitable for all LOBADUR® Water-based finishes

Recommended use:
Suitable for all LOBADUR® Water-based finishes

Application:

• For professional Use only!
• BEFORE USING, READ AND UNDERSTAND ALL LABEL INSTRUCTIONS AND MATERIAL SAFETY DATA SHEETS.
• Sand and prepare floors according to NWFA instructions.
• ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY, APPEARANCE AND DESIRED RESULTS.
• Shake material well before use.
• Do not thin. Do not add water.
• Do not apply at temperatures below 55°F. Make sure material is at room temperature. Always maintain adequate ventilation during all phases of the coating and drying process.
• Apply evenly at the recommended coverage rate. Avoid streaks and puddles and lap marks.

Drying time:
• WS Amberizer does not alter the dry time of the desired finish.

Mixing ratio:
Added amount 2%. One bottle to one gallon.

Recommended Procedure for wood floors:
• Add WS Amberizer only right before the application by shaking or stirring thoroughly. When using 2-component-systems (WS 2K Supra, 2K SupraA.T.) add WS Amberizer only AFTER adding hardener to the mass!
• Perform application according to technical information of the finish, regard pro-longed drying times.

Compatibility:
When this product is used in combination with other LOBA products the Technical Information of these products have to be followed. Always prepare test areas to determine suitability of other products than LOBA.